Linksys SPA1001

5-22
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5 Linksys ATA Field Reference
Regional Tab
Distinctive Ring/CWT Pattern Names
CWT6 Cadence Cadence script for distinctive CWT 6.
The default is 30(.1/.1, .3/.1, .1/9.3).
CWT7 Cadence Cadence script for distinctive CWT 7.
The default is 30(.1/.1, .3/.1, .1/9.3).
CWT8 Cadence Cadence script for distinctive CWT 8.
The default is 2.3(..3/2).
Field Description
Ring1 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 1 for the inbound
call.
The default is Bellcore-r1.
Ring2 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 2 for the inbound
call.
The default is Bellcore-r2.
Ring3 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 3 for the inbound
call.
The default is Bellcore-r3.
Ring4 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 4 for the inbound
call.
The default is Bellcore-r4.
Ring5 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 5 for the inbound
call.
The default is Bellcore-r5.
Ring6 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 6 for the inbound
call.
The default is Bellcore-r6.
Ring7 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 7 for the inbound
call.
The default is Bellcore-r7.
Ring8 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 8 for the inbound
call.
The default is Bellcore-r8.