5-71
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5 Linksys ATA Field Reference
PSTN User Tab (SPA3102/AG310)
PSTN Ring Thru Line 1 Ring Settings
PSTN/VoIP Caller Commands via DTMF
Field Description
Default Ring The default ring to be used to ring through Line 1. Choose from {1,2,3,4,5,6,7,8,Follow
Line 1}. If Follow Line 1 is selected, the ring to be used is determined by Line 1’s
distinctive ring settings.
The default is 1.
Field Description
**#
Disconnect the PSTN line (SPA will take the FXO port on-hook).
**1
End the current call and restarts dial tone.
To Next Page
Loading...
