Linksys SPA9000 User Manual

IP Telephony System
Table of Contents
Chapter 1: Introduction 1
Welcome 1
What’s in this Guide? 2
Chapter 2: Applications for the IP Telephony System 4
How Does the IP Telephony System Fit into My Business or Home? 4
What Does the IP Telephony System Do? 4
A Typical Scenario 4
Which Call Management Features Does the IP Telephony System Offer? 5
Chapter 3: Getting to Know the IP Telephony System 6
The Back Panel 6
The Front Panel 7
Chapter 4: Getting Started 8
Overview 8
Before You Begin 8
Instructions for Installing the IP Telephony System 9
Receiving and Handling External Phone Calls 13
Configuring the Auto-Attendant 13
Chapter 5: Using the Interactive Voice Response Menu 14
Overview 14
Accessing the Interactive Voice Response Menu 14
Using the Interactive Voice Response Menu 14
Entering a Password 19
Configuring the Settings for Your Internet Phone Service 19
Configuring the Auto-Attendant Messages 20
Chapter 6: Using the Web-based Utility 22
Overview 22
How to Access the Web-based Utility 23
The PBX Status Screen 23
The Router Tab 25
The Voice Tab 31
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560

Linksys SPA9000 Specifications

Physical Interfaces

Ethernet ports	2 10/100BaseT RJ-45
Phone ports	2 RJ-11 FXS
Ring voltage	40-55 VRMS
Ring frequency	10 Hz - 40 Hz
Maximum ringer load	3 REN

Power

On-hook voltage	-50 V NOMINAL
Off-hook current	25 mA min
Terminating impedance	Configurable, including 600 ohms