34
Chapter 6: Using the Web-based Utility
The Voice Tab
IP Telephony System
The Voice - System Screen
This screen lets you configure system settings.
System Configuration
Restricted Access Domains. Enter the domain names permitted to access the System.
Enable Web Admin Access. This setting lets you enable or disable local access to the Web-based Utility. Select
yes or no from the drop-down menu. The default is yes.
Admin Passwd. Enter the password for the administrator. (By default, there is no password.)
User Password. Enter the password for the user. (By default, there is no password.)
Miscellaneous Settings
Syslog Server. Enter the IP address of the syslog server, which logs system information and critical events of the
System.
Debug Server. Enter the IP address of the debug server, which logs debug information of the System.
Debug Level. This determines the level of debug information that will be generated. Select 0, 1, 2, or 3 from the
drop-down menu. The higher the debug level, the more debug information will be generated. The default is 0,
which indicates that no debug information will be generated.
When you have finished making changes, click the Submit All Changes button to save the changes, or click the
Undo All Changes button to undo your changes.
Figure 6-13: Voice - System Screen
IMPORTANT: In most cases, you should not change these settings unless instructed to do by
your ITSP.
To Next Page
Loading...
Need help?
Physical Interfaces
Power
