Need help?Do you have a question about the Linksys PAP2T-NA and is the answer not in the manual?
General| Category | Adapter |
|---|---|
| Model | PAP2T-NA |
| Ports | 2 FXS ports |
| Power Supply | 5V DC |
| QoS | Yes |
| Type | Analog Telephone Adapter |
| Network Interface | 10/100 Mbps Ethernet |
| Protocols | SIP |
| Voice Codecs | G.711, G.726, G.729 |
| Weight | 0.5 lbs |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20 to 70 °C |
| Humidity | 10% to 90% non-condensing |
| Fax Support | T.38 |
Introduces the Linksys PAP2 as a voice over Internet protocol telephone adapter using SIP.
Guides users through configuring the PAP2 device to connect to Net2Phone's provisioning server for account downloads.
Details the procedure for removing a VoiceLine account and resetting the PAP2 device to factory defaults.
To Next Page
