Linksys PAP2 Devices Administrator’s Guide
9
Removing VoiceLine Service
The following procedure removes the VoiceLine
account from the PAP2 device.
Login to the Partner Resource Center and close the
device’s account from the Edit Device Information
page.
1. Wait 10 minutes and reboot the device by
removing the A/C power cord from the
adapter, waiting 5 seconds, and re-connecting
it.
After rebooting, lift the handset to ensure there
is no dial tone.
2. Lift the handset and dial **** (four stars).
3. Using the telephone’s number pad, dial 73738
(RESET).
The device will reset to factory defaults.
To Previous Page
Loading...
Need help?
General
