Voice Gateway with Router
9
Chapter 4: Getting Started
Before You Begin
Chapter 4: Getting Started
Before You Begin
Make sure you have the following:
• An active Internet connection
• An active Internet phone service account and its settings
• cable/DSL modem
• One computer for configuration of the Voice Gateway
• Analog telephone or fax machine with an RJ-11 phone cable
Connecting the Voice Gateway
1. Power off your network devices, including your modem and PC.
2. If you have traditional phone service, connect the RJ-11 phone cable (included) to the Voice Gateway’s LINE
port and your telephone wall jack.
3. Connect one end of a different RJ-11 phone cable to the Voice Gateway’s PHONE port. Connect the other
end to your analog telephone or fax machine.
Figure 4-1: Connect to the Telephone
Wall Jack
IMPORTANT: Do not connect the PHONE port to a telephone wall jack. Make sure you only
connect a telephone or fax machine to the PHONE port. Otherwise, the Voice Gateway or the
telephone wiring in your home or office may be damaged.
Figure 4-2: Connect a Telephone
To Next Page
Loading...
