Linksys SPA3102 - Figure 6-18: PSTN Ring Thru Line 1 Ring Settings

Voice Gateway with Router
48
Chapter 6: Using the Web-based Utility
The Voice Tab
PSTN Ring Thru Line 1 Ring Settings
This ring tone will be used to ring through Line 1.
Default Ring. Select the default ringing pattern for all callers. If you select Follow Line 1, then the ring selection
will be determined by Line 1’s distinctive ring settings.
When you have finished making your change, click the Submit All Changes button to save the changes, or click
the Undo All Changes button to undo your change.
Figure 6-18: PSTN Ring Thru Line 1 Ring
Settings