Wire-speed switching and Linksys reliability in a 16-port Gigabit
switch
Product Data
Model SR2016
Wired
16-Port 10/100/1000 Gigabit
Switch
The 16-Port 10/100/1000 Gigabit Switch provides non-blocking, wire
speed switching for your 10, 100, and 1000 megabit network clients.
Drop this switch in place of your current workgroup hub or switch,
and you can upgrade your high-requirement workstations to full
Gigabit speeds as necessary, while continuing to service other clients
at their current speeds. Or build your network from the ground up,
with appropriate link speeds for each user's requirements. Either
way, it's perfect for graphics, multimedia, and other applications that
have to move large files across the network quickly.
With the 16-Port 10/100/1000 Gigabit Switch, you can connect your
existing 10/100 Ethernet network to a Gigabit server backbone
without any additional equipment. All ports have automatic MDI/
MDI-X crossover detection, so you don't have to worry about the
cable type. Each port independently and automatically negotiates for
best speed and whether to run in half- or full-duplex mode. Address
learning and aging is supported, as well as 802.3x flow control with
head-of-line blocking prevention to keep your high-speed clients
from bogging down in lower-speed traffic. Fast store-and-forward
switching prevents damaged packets from being passed on into the
network.
World famous Linksys reliability and the limited lifetime warranty give
you peace of mind and the rackmount form factor integrates
smoothly into your network infrastructure. Let the Linksys 16-Port
10/100/1000 Gigabit Switch kick your network into high gear.
Sixteen 10/100/1000Mbps, half/full
duplex, switched ports.
Forwards packets at non-blocking,
full wire speed.
FAll ports have auto speed
negotiation and auto MDI/MDI-X
crossover detection.
Linksys reliability and limited
lifetime warranty.
To Next Page
Need help?
General
