Need help?Do you have a question about the Linksys SRW2024P and is the answer not in the manual?
General| Ports | 24 |
|---|---|
| PoE | Yes |
| PoE Ports | 24 |
| PoE Budget | 370W |
| VLANs Supported | 256 |
| Jumbo Frame Support | Yes |
| Layer | Layer 2 |
| Power Supply | Internal |
| Quality of Service | Yes |
| MAC Address Table Size | 8000 |
| Management | SNMP |
| Features | IGMP Snooping |
| Dimensions | 440 x 44 mm |
Step-by-step instructions for connecting network devices and powering on the switch.
Instructions on connecting the switch to other network devices or uplinks.
Guides users through setting up HyperTerminal for console access.
Explains how to connect to the switch using a Telnet session for configuration.
Details navigating menus and performing configurations via the console interface.
Provides instructions on how to access the switch's web interface.
Configures IP settings, default gateways, and identification details.
Shows and allows configuration of settings for each of the switch's ports.
Configures Power over Ethernet (PoE) settings for each port.
Provides tools to configure VLANs, including single VLANs and VLAN ranges.
Manages port settings within VLANs, including port mode and PVID.
Assigns ports as tagged or untagged members to specific VLANs.
Configures VLAN membership for ports, defining port mode and VLAN joining.
Defines IP-based Access Control Lists (ACLs) for packet filtering.
Defines MAC-based Access Control Lists (ACLs) for packet filtering.
Enables and configures port-based 802.1X authentication using a RADIUS server.
Configures port security by setting authorized MAC addresses and actions.
Enables secure web interface access using HTTPS with SSL encryption.
Configures Secure Shell (SSH) for secure remote management access.
Manages user accounts and passwords for system management access.
Restores the switch to its original factory default settings.
To Next Page
