Linksys SRW2024P User Manual

20
Chapter 4: Using the Console Interface for Configuration
Configuring the Switch through the Console Interface
24-Port 10/100/1000 Gigabit Switch with Webview and PoE
Restore System Default Settings
To restore the Switch back to the factory default settings, select Restore System Default Settings and press the
Enter key. You will be asked if you want to continue. Press the y key to restore the Switch’s default settings, or
press the n key to cancel.
Reboot System
Select Reboot System and press the Enter key if you want to restart the Switch. You will be asked if you want to
continue. Press the y key to reboot the Switch, or press the n key to cancel. After the Switch has rebooted, the
Switch Main Menu screen will appear.
Back to Main Menu
Select Back to Main Menu and press the Enter key if you want to return to the Switch Main Menu screen.
Figure 4-20: Restore System Default Settings
Figure 4-21: Reboot System
Figure 4-22: Back to Main Menu

Linksys SRW2024P Specifications

General

Brand	Linksys
Model	SRW2024P
Category	Switch
Language	English