EasyManua.ls Logo

Linksys SRW2008

Linksys SRW2008
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Model No.
WIRED
with WebView
8-Port 10/100/1000 Gigabit Switch
SRW2008/SRW2008P/SRW2008MP
User Guide

Table of Contents

Other manuals for Linksys SRW2008

Question and Answer IconNeed help?

Do you have a question about the Linksys SRW2008 and is the answer not in the manual?

Linksys SRW2008 Specifications

General IconGeneral
LayerLayer 2
Switching Capacity16 Gbps
Forwarding Rate11.9 Mpps
MAC Address Table8K
VLANs Supported256
Jumbo Frame SupportYes
Power over Ethernet (PoE)No
Power SupplyInternal
Operating Temperature0°C to 40°C
Storage Temperature-20 to 70°C (-4 to 158°F)
Humidity10% to 85% non-condensing
ManagementWeb-based
StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Ports8 x 10/100/1000 Mbps

Summary

Chapter 1: Introduction

Welcome and Product Overview

Introduces the guide, models SRW2008, SRW2008MP, SRW2008P, and key features.

Key Features Explained

Highlights security, QoS, link aggregation, and management functionalities of the switches.

Chapter 2: Getting to Know the Switch

Switch Overview and Front Panel Details

Describes switch differences, SRW2008 front panel LEDs (System, Link/Act, Gigabit), and ports.

SRW2008 PMP Front Panel and Back Panel

Details SRW2008P/MP front panel LEDs (PoE) and ports, plus back panel components.

Chapter 3: Connecting the Switch

Installation and Placement Options

Provides guidelines for installing the switch, including desktop, rack-mount, and wall-mount options.

Connecting Network Devices

Step-by-step instructions for connecting network devices, power, and initial power-up.

Chapter 4: Using the Console Interface for Configuration

HyperTerminal and Telnet Configuration

Guides through configuring HyperTerminal, Telnet session, and initial CLI login.

Console Interface Navigation and Settings

Explains navigating the console interface, main menus, and system configuration options.

Chapter 5: Using the Web-based Utility for Configuration

Accessing the Web-based Utility

Instructions for accessing the switch configuration via a web browser.

Setup Tab Configuration

Details Summary, Network Settings, and Time configuration options in the Setup tab.

Port Management and VLAN Management

Covers configuring port settings, link aggregation, LACP, PoE, and VLANs.

Security Features

Explains ACL binding, RADIUS, TACACS+, 802.1x, and Port Security settings.

QoS and Spanning Tree Configuration

Details QoS settings (CoS, Queue, Bandwidth) and Spanning Tree protocols (STP, RSTP, MSTP).

SNMP and Administration Tasks

Covers SNMP settings, Multicast, Admin tabs (User Auth, Logging, Save Config, Firmware Upgrade).

Appendix A: Cabling Information

Gigabit Ethernet and Fiber Optic Cabling

Explains Gigabit Ethernet speeds and types of fiber optic cabling and connectors.

Appendix C: Software Download

Downloading using Xmodem

Step-by-step guide for downloading software via Xmodem through the startup menu.

Appendix E: Specifications

SRW2008 Specifications

Lists technical specifications for the SRW2008 model, including ports, performance, and standards.

SRW2008 MP Specifications

Lists technical specifications for the SRW2008MP model, including ports, performance, and standards.

SRW2008 P Specifications

Lists technical specifications for the SRW2008P model, including ports, performance, and standards.

Appendix H: Contact Information

Linksys Support and Resources

Provides contact details for Linksys online resources, technical support, and RMA.

Related product manuals