Need help?Do you have a question about the Linksys SRW2016 and is the answer not in the manual?
General| Ports | 16 |
|---|---|
| Layer | Layer 2 |
| Switching Capacity | 32 Gbps |
| Forwarding Rate | 23.8 Mpps |
| MAC Address Table | 8K entries |
| VLANs | 256 |
| Rack Mountable | Yes |
| Power Supply | Internal |
| Operating Temperature | 32 to 104°F |
| Storage Temperature | -4 to 158°F |
| Humidity | 10% to 85% non-condensing |
| Jumbo Frame Support | 9KB |
| Dimensions | 440 x 257 x 44 mm (17.32 x 10.12 x 1.73 in) |
Details on navigating and interacting with the console menu system.
Steps to log in to the switch's web interface and start configuration.
Configure individual port settings, speed, duplex, and link aggregation.
Create, manage, and assign ports to VLANs, including GVRP configuration.
Define IP and MAC based Access Control Lists to filter network traffic.
Configure RADIUS, TACACS+, 802.1x, port security, and storm control.
Prioritize traffic, manage queues, and configure bandwidth settings.
Configure STP, RSTP, and MSTP to prevent network loops and manage topology.
Configure IGMP Snooping and multicast packet forwarding.
To Next Page
