Linksys SRW2008 User Manual

21
Chapter 4: Using the Console Interface for Configuration
Configuring the Switch through the Console Interface
WebView Switches
Username & Password Settings
From this screen, you can administer the user names and passwords of those accessing the Switch.
Select Edit and press the Enter key to make changes. When your changes are complete, press the Esc key to
return to the Action menu. Select Save and press the Enter key to save your changes. To exit, select Quit and
press the Enter key.
Security Settings
The Security Settings screen enables you to configure security settings on the Switch, as well as generate and
display the certificate.
SSL Certificate Generation
Use the Certificate Generation screen to specify a device-generated certificate.
The following fields are specified:
Public Key Length - Specifies the SSL RSA key length. (Range: 512 - 2048)
Organization Name - Specifies the organization name. (Range: 1 - 64)
Locality or City Name - Specifies the location or city name. (Range: 1 - 64)
State or Province Name - Specifies the state or province name. (Range: 1 - 64)
Country Name - Specifies the country name. (Range: 2 - 2)
Validity Term - Specifies number of days certification is valid. (Range: 30 - 3650)
NOTE: The Username & Password Settings screen can also be used to set passwords for other users.
Figure 4-19: Username & Password Settings
Figure 4-20: Security Settings
Figure 4-21: SSL Certificate Generation

Linksys SRW2008 Specifications

General

Brand	Linksys
Model	SRW2008
Category	Switch
Language	English