78
Chapter 5: Using the Web-based Utility for Configuration
Admin Tab - Reboot
24-Port 10/100/1000 Gigabit Switch with Webview and PoE
Admin Tab - Reboot
The Reboot screen resets the device. The device configuration is automatically saved before the device is
rebooted.
Admin Tab - Factory Default
The Factory Reset screen restores the Switch’s factory default settings. Click the Reset to Factory Default
Configuration button, then click OK to confirm and restart the Switch.
Figure 5-64: Admin - Reboot
Figure 5-65: Admin - Factory Defaults
NOTE: Restoring the factory defaults will erase all configuration settings that you have made.
You can save a backup of your current configuration settings from the Admin - Save Configuration
screen.
To Next Page
Loading...
Need help?
General
