Linksys WMP300N

22
Chapter 5: Using the Wireless Network Monitor
Connect
Wireless-N PCI Adapter
• PSK-Personal Needed for Connection
If the network has the wireless security PSK-Personal enabled, then you will see the PSK-Personal Needed
for Connection screen. Select the appropriate encryption type, TKIP or AES. Enter the network’s Pre-shared
Key in the Pre-shared Key field. To connect to the network, click the Connect button. To cancel the
connection, click the Cancel button.
• PSK2 Personal Needed for Connection
If the network has the wireless security PSK2-Personal enabled, then you will see the PSK2 Personal Needed
for Connection screen. Enter the network’s Pre-shared Key in the Pre-shared Key field. To connect to the
network, click the Connect button. To cancel the connection, click the Cancel button.
Figure 5-7: PSK-Personal Needed for
Connection
Figure 5-8: PSK2-Personal Needed for
Connection