26
Chapter 6: Configuring the PrintServer Using the Web-based Utility
The Status Tab - Device
Wireless-G PrintServer for USB 2.0
The Status Tab - Device
The Device tab allows you to view information about the PrintServer. No values can be changed on this screen.
This screen is for information only. (See Figure 6-11.)
Clicking the Refresh button causes the PrintServer to retrieve this information again.
The Status Tab - Printer
The Printer tab allows you to view information about the Printers. No values can be changed on this screen. This
screen is for information only. (See Figure 6-12.)
Click the Print Test Page button to print a test page on the respective printer.
Clicking the Refresh button causes the PrintServer to retrieve the status information again.
Figure 6-11: Status Tab - Device
Figure 6-12: Status Tab - Printer
To Next Page
Loading...
