30
Wireless-G PrintServer for USB 2.0
Chapter 8: Bi-Admin Management
Starting the Bi-Admin Management Utility
Starting the Bi-Admin Management Utility
1. To start the Bi-Admin program, click Start, Programs, Print Server Utility, and then Bi-Admin
Management Utility. If the Bi-Admin Management Utility icon has been created, you can just double-click it
instead. You can drag the shortcut icon onto your Desktop for easy access to the Bi-Admin Management
Utility.
2. When the Bi-Admin Management Utility appears, it will ask for the Connected Protocol. (See Figure 8-5.)
Make sure the box next to TCP/IP is checked. Click the OK button.
3. The Bi-Admin Management Utility will automatically scan the network for the PrintServer. (See Figure 8-6.)
Figure 7-6: Searching for Device
Figure 7-5: Connected Protocol
To Next Page
Loading...
