Wireless-G PrintServer for USB 2.0
List of Figures
Figure 2-1: PrintServer’s Back Panel 3
Figure 2-2: PrintServer’s Front Panel 4
Figure 3-1: Connecting to the LAN Port 5
Figure 3-2: Connecting to the USB Port 5
Figure 3-3: Connecting to the Parallel Port 5
Figure 3-4: Connecting to the Power Port 5
Figure 4-1: Welcome 6
Figure 4-2: Wireless-G PrintServer Setup 6
Figure 4-3: Password 7
Figure 4-4: Basic Settings 7
Figure 4-5: IP Settings 8
Figure 4-6: Set PrintServer’s Password 8
Figure 4-7: Wireless Settings 9
Figure 4-8: Wireless Security Settings 10
Figure 4-9: Wireless Security Settings - WEP Key 11
Figure 4-10: Confirmation 11
Figure 4-11: Congratulations 12
Figure 5-1: Welcome 13
Figure 5-2: Driver Setup Welcome 14
Figure 5-3: Choose Destination Location 14
Figure 5-4: Select Program Folder 15
Figure 5-5: Setup Complete 15
Figure 5-6: Information 16
Figure 5-7: Printer Port Setup 16
Figure 5-8: Configure Printer Port 17
Figure 6-1: Password to Access Web-based Utility 18
Figure 6-2: Setup 18
Figure 6-3: Protocol Tab - TCP/IP 19
Figure 6-4: Protocol Tab - AppleTalk 19
Figure 6-5: Protocol Tab - NetBEUI 20
To Next Page
