What to do if Linksys Wireless Router was not successfully set up?
- VvbarrettJul 27, 2025
If your Linksys Wireless Router was not successfully set up, try the following: 1. Reset the router by pressing and holding the Reset button (using a paperclip or pin) until the power LED starts flashing (about 10 seconds). Then, install the router again. 2. If resetting doesn't work, temporarily disable your computer’s firewall and try installing the router again. Refer to your security software’s instructions for help with disabling the firewall. 3. As a last resort, use another computer to install the router.