Need help?Do you have a question about the Linksys WRT150N and is the answer not in the manual?
General| standards | Draft 802.11n, 802.11g, 802.11b, 802.3, 802.3u |
|---|---|
| ports | Power, Internet, Ethernet |
| number of antennas | 2 |
| RF power (EIRP) | 17 dBm |
| antenna gain | 1.8 dBi |
| security features | WEP, WPA, WPA2 |
| security key bits | 128-Bit, 256-Bit |
| power | 12V, 1A |
| operating temperature | 0 to 40°C |
| storage temperature | -20 to 60°C |
| operating humidity | 10 to 85% Noncondensing |
| storage humidity | 5 to 90% Noncondensing |
Weight and Dimensions| dimensions | 150 x 36 x 170 mm |
|---|---|
| weight | 371 g |
Provides step-by-step instructions for the physical setup of the router.
Guides users on accessing the router's configuration interface via a web browser.
Explains how to configure the router's Internet connection settings.
Explains how to configure the router's local network settings and DHCP server.
Configures essential wireless network parameters like SSID and network mode.
Sets up security modes like WPA2/PSK for the wireless network.
Allows blocking or allowing specific Internet usage and traffic based on policies.
Customizes port services for common applications by mapping ports.
Sets up port forwarding for specialized Internet applications like web or email servers.
Manages Quality of Service to prioritize network traffic for demanding applications.
Allows changing router access settings, UPnP features, and backup/restore configurations.
Restores the router's configuration to its original factory default settings.
Guides users on updating the router's firmware to the latest version.
Provides solutions for common issues encountered during router installation and operation.
Answers common questions about the router's features, settings, and connectivity.
Lists essential steps to secure the wireless network against threats.
Step-by-step instructions for updating the router's firmware using the web-based utility.
To Next Page
