Linksys WRT150N User Manual

Wireless-N Broadband Router
Table of Contents
Chapter 1: Introduction 1
Welcome 1
What’s in this User Guide? 2
Chapter 2: Planning Your Wireless Network 4
Network Topology 4
Ad-Hoc versus Infrastructure Mode 4
Network Layout 4
Chapter 3: Getting to Know the Wireless-N Home Router 6
The Back Panel 6
The Front Panel 7
The Top Panel 7
Chapter 4: Connecting the Wireless-N Home Router 8
Hardware Installation 8
Chapter 5: Configuring the Wireless-N Home Router 9
Overview 9
How to Access the Web-based Utility 11
The Setup Tab - Basic Setup 11
The Setup Tab - DDNS 17
The Setup Tab - MAC Address Clone 19
The Setup Tab - Advanced Routing 20
The Wireless Tab - Basic Wireless Settings 22
The Wireless Tab - Wireless Security 23
The Wireless Tab - Wireless MAC Filter 26
The Wireless Tab - Advanced Wireless Settings 27
The Security Tab - Firewall 29
The Security Tab - VPN Passthrough 30
The Access Restrictions Tab - Internet Access Policy 31
The Applications & Gaming Tab - Single Port Forwarding 33
The Applications & Gaming Tab - Port Range Forwarding 34
The Applications & Gaming Tab - Port Range Triggering 35
The Applications & Gaming Tab - DMZ 36
The Applications and Gaming Tab - QoS 37

Linksys WRT150N Specifications

General

standards	Draft 802.11n, 802.11g, 802.11b, 802.3, 802.3u
ports	Power, Internet, Ethernet
number of antennas	2
RF power (EIRP)	17 dBm
antenna gain	1.8 dBi
security features	WEP, WPA, WPA2
security key bits	128-Bit, 256-Bit
power	12V, 1A
operating temperature	0 to 40°C
storage temperature	-20 to 60°C
operating humidity	10 to 85% Noncondensing
storage humidity	5 to 90% Noncondensing

Weight and Dimensions

dimensions	150 x 36 x 170 mm
weight	371 g