Troubleshooting
WRT 200AC | Troubleshooting 10
Your Router’s Appearance May Vary
This chapter can help you solve common setup issues and connect to the Internet. You
can find more help from our award-winning customer support at
linksys.com/support.
YOUR ROUTER WAS NOT SUCCESSFULLY SET UP
If Linksys Smart Wi-Fi Did Not Complete The Setup:
• Using a paperclip or pin, press and hold the Reset button until the power LED on the
front of the router starts flashing (about 0 seconds). Install the router again.
• If that doesn’t work, temporarily disable your computer’s firewall (see the security
software’s instructions for help). Install the router again.
• If you still haven’t set up the router, find another computer, and use that computer to
install the router again.
To Next Page
Loading...
