Linksys WRT350N User Manual

Wireless-N Gigabit Router with Storage Link
Table of Contents
Chapter 1: Introduction 1
Welcome 1
What’s in this User Guide? 2
Chapter 2: Planning Your Wireless Network 4
Network Topology 4
Ad-Hoc versus Infrastructure Mode 4
Network Layout 5
Chapter 3: Getting to Know the Wireless-N Gigabit Router with Storage Link 6
The Back Panel 6
The Front Panel 7
The Top Panel 7
Chapter 4: Connecting the Wireless-N Gigabit Router with Storage Link 8
Hardware Installation 8
Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link 9
Overview 9
How to Access the Web-based Utility 11
The Setup Tab - Basic Setup 11
The Setup Tab - DDNS 17
The Setup Tab - MAC Address Clone 19
The Setup Tab - Advanced Routing 20
The Wireless Tab - Basic Wireless Settings 22
The Wireless Tab - Wireless Security 23
The Wireless Tab - Wireless MAC Filter 26
The Wireless Tab - Advanced Wireless Settings 27
The Security Tab - Firewall 29
The Security Tab - VPN Passthrough 30
The Storage Tab - Disk 31
The Storage Tab - Share 32
The Storage Tab - Administration 33
The Storage Tab - Media Server 35
The Storage Tab - FTP Server 36
The Access Restrictions Tab - Internet Access Policy 37

Linksys WRT350N Specifications

Standards and Ports

standards	Draft 802.11n, 802.11g, 802.11b, 802.3, 802.3u, 802.3x, 802.3ab, USB 2.0
ports	Power, Internet, Ethernet, USB
cabling type	CAT 5e, USB 2.0

Antenna Specifications

number of antennas	3
RF power (EIRP)	17 dBm
antenna gain	1.8 dBi

Power

power voltage	12V
power current	1.5A
power adapter	Included

Operating Environment

operating temperature	0 to 40°C
storage temperature	-20 to 60°C
operating humidity	10 to 85% non-condensing

Weight and Dimensions

weight	520 g
dimensions	188 x 40 x 176 mm
device dimensions	188 x 40 x 176 mm