Linksys Wireless G WRT54G
Interlink Networks, Inc. Page 7 of 9
Linksys WRT54G Router.doc 11/8/2004 2:11 PM
4 Click Continue.
The screen will refresh to allow configuration of the RADIUS Server.
5 Enter the following:
o Security Mode – WPA-Radius
o WPA Algorithm –TKIP
o RADIUS Server Address – LucidLink server IP address.
o RADIUS Port– 1812
o Secret Key– Shared Secret configured on LucidLink server Settings dialog. A Shared
Secret is auto-generated when you install the server. You can copy this value from the
Management Console Settings dialog to the router's interface page.
o Left Key Renewal Timeout– leave default.
6 Click Save Settings.
7 Click Continue.
To Next Page
Loading...
