Router Configuration Note
2004 Interlink Networks, Inc. All rights reserved. Page 1 of 9
Phone: 734-821-1250 Web: www.lucidlink.com/Tech_Support/ Email: support@lucidlink.com
Linksys WRT54G Router.doc 11/8/2004 2:11 PM
Linksys Wireless G WRT54G
Version 1.0
Scope
This document describes how to configure the Linksys Wireless G WRT54G router to work with
LucidLink Wireless Security Software, version 1.7. The document:
• Focuses on the manual configuration of the router.
• Does not address LucidLink software installation or configuration.
• Assumes the LucidLink server is installed and configured with an IP address and shared
secret.
Requirements
This document will work with routers that meet the following requirements:
Product Model Number
WRT54G
Firmware Version
V2.02.2
NICs
D-Link AirPlus DWL-G650 Wireless Cardbus Adapter (rev C)
Intel(R) PRO/Wireless LAN 2100 3A Mini PCI Adapter
Dell Wireless WLAN 1350 Mini-PCI Card
The exact configuration of the router depends on the combination of router, wireless adapter
card, and client operating system used. For a list of compatible and supported hardware
combinations, go to: www.lucidlink.com/Tech_Support/Compatibility.asp
To Next Page
