3
A Open your web browser and type http://192.168.1.1 in the Address field,
then press the Enter key.
You see a password request screen like this one:
B Leave the User name field blank, and type admin, the default password, in
the Password field, then click OK.
C You see the Web-based Utility with the Setup tab selected. If your Internet
Service Provider (ISP) requires a Host Name and Domain name, enter
them in the fields provided, otherwise leave
them blank.
NOTE: Make sure your PC’s Ethernet adapter is set to obtain an IP address
automatically. For more information, refer to Windows Help.
NOTE: For added security, create a new password using the Administration tab’s
Management screen. See the on-screen User Guide included on the Setup Wizard
CD for instructions.
2
Configure the Router
To Next Page
Loading...
