Wireless-G Broadband Router with 2 Phone Ports
15
Chapter 5: Configuring the Router
Overview
Access Restrictions
• Filter. To block specific users from Internet access, you can set up IP address, port, and MAC address
filtering.
• Device Access Control. Use this screen to control remote access of the Router.
Applications & Gaming
• Port Range Forwarding. Set up public services or other specialized Internet applications on your network.
• Port Triggering. To set up triggered ranges and forwarded ranges for Internet applications, click this tab.
• DMZ. Click this tab to allow one local user to be exposed to the Internet for use of special-purpose services.
• QoS. Enable QoS (Quality of Service) to maximize network performance.
Administration
• Management. On this screen, alter the Router’s user name, password, and UPnP settings.
• Log. If you want to view or save activity logs, click this tab.
• Factory Defaults. If you want to reset the Router to its router factory default settings, then use this screen. If
you want to reset the Router to its voice factory default settings, then you will need a user name and
password available only from your Internet phone service provider. Contact your provider for more
information.
To Next Page
Loading...
