Wireless-G Broadband Router with 2 Phone Ports
57
Chapter 5: Configuring the Router
The Voice Tab - System
The Voice Tab - System
This screen lets you change the password for user access to the Web-based Utility.
System Configuration
Enable Web Server. This feature lets you enable or disable access to the Web-based Utility from the Internet
(WAN) side. Select yes or no from the drop-down menu. The default is yes.
User Password. Enter the password for the user. (By default, there is no password.)
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes.
Figure 5-42: Voice Tab - System
NOTE: If your ITSP supplied
this password, you may not be
able to change it.
To Next Page
Loading...
