EasyManua.ls Logo

Linksys WRVS4400N

Linksys WRVS4400N
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4: Getting to Know the
Router
The Front Panel
The Router’s LEDs are located on the front panel of the Router.
LEDs
POWER Green. The POWER LED lights up when the Router is powered on. The LED
flashes when the Router runs a diagnostic test.
IPS
Green/Red. The
IPS
LED lights up when the IPS function is enabled. The LED
light is off when the IPS functions are disabled. The IPS LED flashes green when
an external attack is detected. The IPS LED flashes red when an internal attack is
detected.
WIRELESS Green. The WIRELESS LED lights up when the wireless module is enabled. The
LED is off when the wireless module is disabled. The WIRELESS LED flashes
green when the data is transmitting or receiving on the wireless module.
1-4 (ETHERNET) Green. For each port, there are three LEDs. If the corresponding LED is
continuously lit, the Router is connected to a device at the speed indicated through
the corresponding port (1, 2, 3, or 4). The LED flashes when the Router is actively

Other manuals for Linksys WRVS4400N

Related product manuals