Need help?Do you have a question about the Linksys WRV200 and is the answer not in the manual?
General| Model | WRV200 |
|---|---|
| Device Type | Wireless Router |
| Wireless Standards | 802.11b/g |
| Frequency Band | 2.4 GHz |
| Maximum Wireless Speed | 54 Mbps |
| Security | WEP, WPA, WPA2 |
| Power | 12V DC, 1A |
| Ports | 4 x 10/100 Ethernet, 1 x WAN |
| VPN Support | IPSec, PPTP |
| Firewall | SPI Firewall |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Humidity | 10% to 85% (non-condensing) |
Introduces the router's web-based utility and its main configuration tabs.
Lists the sub-tabs within the Setup section for network configuration.
Details the various security features available under the Firewall tab.
Outlines the VPN configuration options available on the router.
Explains Quality of Service settings for traffic management.
Covers router management, logging, diagnostics, and system settings.
Describes the different status screens for monitoring the router.
Provides instructions on accessing the router's configuration interface.
Introduces the basic setup screen for internet and network settings.
Configures fundamental wireless network parameters like mode and SSID.
Details options for securing the wireless network using WPA and WPA2.
Explains general firewall settings to enhance network security.
Describes how to set up port forwarding for specific applications.
Explains how to configure port triggering for special internet applications.
Details the setup and configuration of IPSec VPN tunnels.
Explains how to establish a secure IPSec tunnel for private networks.
Details the process of creating a secure IPSec tunnel with step-by-step instructions.
Explains how to configure an IPSec VPN tunnel between two VPN routers.
Provides instructions for configuring VPN settings on VPN Router 1.
To Next Page
