40
Chapter 6: Configuring the Wireless-G VPN Router
The VPN Tab - VPN Passthrough
Wireless-G VPN Router with RangeBooster
When you have finished making changes to the screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes. For help information, click More.
The VPN Tab - VPN Passthrough
This tab is used to allow VPN tunnels to pass through the Router’s firewall using IPSec, L2TP, or PPTP protocols.
VPN PassThrough
IPSec Passthrough. IPSec (Internet Protocol Security) is a suite of protocols used to implement secure exchange
of packets at the IP layer. To allow IPSec Passthrough, click the Enabled button. To disable IPSec Passthrough,
click the Disabled button.
PPTP PassThrough. PPTP (Point-to-Point Tunneling Protocol) Passthrough allows the Point-to-Point (PPP) to be
tunneled through an IP network. To allow PPTP Passthrough, click the Enabled button. To disable PPTP
Passthrough, click the Disabled button.
L2TP Passthrough. Layer 2 Tunneling Protocol Passthrough is the method used to enable Point-to-Point
sessions via the Internet on the Layer 2 level. To allow L2TP Passthrough, click the Enabled button. To disable
L2TP Passthrough, click the Disabled button.
Figure 6-35: The VPN Tab - VPN Passthrough
To Next Page
Loading...
