17
Chapter 6: Configuring the Wireless-G VPN Router
The Setup Tab - Basic Setup
Wireless-G VPN Router with RangeBooster
User Name and Password. Enter the User Name and Password provided by your ISP. Then, enter the
Password again to confirm it.
Auth Type: Select from two authentication protocols as required by your ISP: Password Authentication
Protocol (PAP) and Challenge Handshake Authentication Protocol (CHAP).
Connect on Demand: Max Idle Time. You can configure the Router to cut the Internet connection after it has
been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated
due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as
soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio
button. In the Max Idle Time field, enter the number of minutes you want to have elapsed before your Internet
connection terminates.
Keep Alive Option: Redial Period. If you select this option, the Router will periodically check your Internet
connection. If you are disconnected, then the Router will automatically re-establish your connection. To use
this option, click the radio button next to Keep Alive. In the Redial Period field, you specify how often you
want the Router to check the Internet connection. The default Redial Period is 30 seconds.
When you have finished making changes to the screen, click the Save Settings button to save the changes,
or click the Cancel Changes button to undo your changes.
PPTP
Point-to-Point Tunneling Protocol (PPTP) is a service that applies to connections in Europe and Israel only.
IP Address. This is the Router’s IP address, when seen from the WAN, or the Internet. Your ISP will provide
you with the IP Address you need to specify here.
Subnet Mask. This is the Router’s Subnet Mask, as seen by external users on the Internet (including your
ISP). Your ISP will provide you with the Subnet Mask.
Default Gateway. Your ISP will provide you with the Default Gateway Address.
PPPTP Server IP. Enter the IP address of the PPPTP server.
User Name and Password. Enter the User Name and Password provided by your ISP.
Auth Type: Select from two authentication protocols as required by your ISP: Password Authentication
Protocol (PAP) and Challenge Handshake Authentication Protocol (CHAP).
Connect on Demand: Max Idle Time. You can configure the Router to cut the Internet connection after it has
been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated
Figure 6-5: Internet Connection Type - PPTP
To Next Page
Loading...
