15
Chapter 6: Configuring the Wireless-G VPN Router
How to Access the Web-based Utility
Wireless-G VPN Router with RangeBooster
Administration
• Management. Alter the Router’s password, its access privileges, SNMP settings, and UPnP settings.
• Log. If you want to view or save activity logs, click this tab.
• Diagnostics. Use this screen to check the connection between the Router and a PC.
• Factory Defaults. If you want to restore the Router’s factory defaults, then use this screen.
• Firmware Upgrade. Click this tab if you want to upgrade the Router’s firmware.
• Reboot. Use this to restart the Router.
Status
• Router. This screen provides status information about the Router.
• Local Network. This provides status information about the local network.
• Wireless. Status information about the wireless network is displayed here.
• System Performance. Status information is provided for all network traffic.
• VPN Clients. This screen provides status information about the Router’s VPN clients.
How to Access the Web-based Utility
To access the web-based utility, launch Internet Explorer or Netscape Navigator, and enter the Router’s default IP
address, 192.168.1.1, in the Address field. Then press Enter.
A password request page will appear. (Windows XP users will see a similar screen.) Enter admin (the default user
name) in the User Name field, and enter admin (the default password) in the Password field. Then click the OK .
Make the necessary changes through the Utility. When you have finished making changes to a screen, click the
Save Settings button to save the changes, or click the Cancel Changes button to undo your changes. Help
information is shown on the right-hand side of a screen. For additional information, click More.
The Setup Tab - Basic Setup
The first screen that appears is the Basic Setup tab. This tab allows you to change the Router's general settings.
Figure 6-2: Setup Tab - Automatic Configuration - DHCP
Figure 6-1: Login Screen
To Next Page
Loading...
