56
Chapter 6: Configuring the Wireless-G VPN Router
The Status Tab - Router
Wireless-G VPN Router with RangeBooster
The Status Tab - Router
The Router screen displays information about the Router and its current settings. The on-screen information will
vary depending on the Internet Connection Type selected on the Setup Tab.
Information
Hardware Version. This shows the installed version and date of the hardware.
Software Version. This shows the installed version and date of the software.
Current Time. The current time is displayed here.
MAC Address. The MAC Address of the Router’s Internet interface is displayed here.
Host Name. If entered on the Setup Tab, the host name is displayed here.
Domain Name. If entered on the Setup Tab, the domain name is displayed here.
Internet Connection
Configuration Type. This shows the information required by your ISP for connection to the Internet. This
information was entered on the Setup Tab.
IP Address. The Router’s Internet IP Address is displayed here.
Subnet Mask and Default Gateway. The Router’s Subnet Mask and Default Gateway address are displayed here
for DHCP and static IP connections.
DNS. Shown here are the DNS (Domain Name Server) IP addresses currently used by the Router.
Release. Available for a DHCP connection, click the Release button to release the current IP address of the
device connected to the Router’s Internet port.
Renew. Available for a DHCP connection, click the Renew button to renew the current IP address—of the device
connected to the Router’s Internet port—with a current IP address.
Click the Refresh button to update the on-screen information. For help information, click More.
Figure 6-56: The Status Tab - Router
To Next Page
Loading...
