Linksys WTR54GS Quick Installation Guide

4
D Select one of the four Internet
Connection Type settings,
shown here. Each Setup
screen and available features
will differ depending on which
connection type you select.
Internet Configuration Type
Automatic Configuration - DHCP:
If you are connecting through
DHCP or a dynamic IP address
from your ISP, keep this default
setting.
Static IP: If your ISP assigns you a
static IP address, select Static IP
from the drop-down menu.
Complete the Internet IP Address,
Subnet Mask, Gateway, and DNS
fields. You need to enter at least
one DNS address.
PPPoE: If you are connecting
through PPPoE, select PPPoE from
the drop-down menu. Complete
the User Name and Password
fields.
Select Keep Alive if you always
want to be connected to your ISP,
or select Connect on Demand if
you are charged for the time that
you are connected to your ISP.
DHCP
Static IP
PPPoE

Linksys WTR54GS Specifications

General

Bandwidth	2.4 GHz
I/O ports	1 x Radio-Ethernet 1 x Ethernet 10Base-T/100Base-TX - RJ-45
xDSL connection	No
Dimensions (WxDxH)	73 x 31 x 107 mm
Maximum data transfer rate	0.054 Gbit/s
Compatible operating systems	Microsoft Windows 98 Second Edition, Microsoft Windows 2000, Microsoft Windows Millennium Edition, Microsoft Windows XP
Data link protocols	Ethernet, IEEE 802.11b, IEEE 802.11g
Minimum RAM	64 MB
Minimum processor	200 MHz
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.3, IEEE 802.3u
Security algorithms	WEP, WPA
MAC address filtering	Yes
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 85 %
Ethernet LAN (RJ-45) ports	2
Certification	FCC, CE, IC-03, Wi-Fi (802.11b, 802.11g), WPA

Weight and Dimensions

Weight	133 g