Linksys WUSB100 User Manual

Chapter 3
Advanced Configuration
5
RangePlus Wireless USB Network Adapter
How to Connect to a Hidden Wireless Network
NOTE: By default, a wireless network’s router
broadcasts the network SSID (name). A “hidden”
wireless network is a network whose router has
been configured not to broadcast the SSID.
Follow these steps to connect to a wireless network that is
not listed on the Connect to a Wireless Network screen.
Select 1. My network is not in this list in the Connect to
a Wireless Network screen. Then click Next.
My network is not in this list
The next screen asks if you want to connect to a hidden 2.
network. If your network is hidden, select Connect to
hidden network, and then click Next.
Confirm Connection to Hidden Network
NOTE: If your wireless network is NOT hidden,
select My Network is not hidden, and then
click Next. Follow the instructions on the next
screen—verify that your network router is turned
on and is within range of the Adapter, and then
click Retry to search for wireless networks again
Then proceed to How to Connect to a Wireless
Network, page 4 to continue.
Enter your wireless network’s name (SSID). Click 3. Next
to continue.
Enter the Wireless Network’s Name (SSID)
If your wireless network uses wireless security, enter 4.
the security key, and then click Next to continue.
Enter the Wireless Network’s Security Key

Linksys WUSB100 Specifications

General

Maximum data transfer rate	0 Mbit/s
Connectivity technology	Wireless
Component for	PC/Laptop
Plug and Play	Yes
Security features	Wi-Fi Protected Access (WPA2)