Model No.
Quick Installation
A Division of Cisco Systems, Inc.
®
Model No.
Wireless
USB Network Adapter
Wireless-G
12
The USB Network Adapter is
installed and set up using the
Setup Wizard that comes on
the CD enclosed.
A To begin, insert the Setup
Wizard CD-ROM into your
CD-ROM drive. The Setup
Wizard should run
automatically, and the
Welcome screen should
appear.
B To install the Adapter,
click Click Here to Start
on the Welcome screen.
C After reading the License
Agreement, click Next to
continue the installation
and Windows will begin
copying the files onto
your PC.
D The Setup Wizard will now
prompt you to connect
the Adapter to your PC’s
USB port.
Proceed to Step 2.
Now that the Setup Wizard has
prompted you to connect the
Adapter, follow the instructions
below.
A Install the Adapter’s USB
connector into the PC’s
USB port.
B The Power LED should
light up when the
Adapter is plugged in.
C Once the Adapter is
connected, click Next on
the Connecting the
Adapter screen to
proceed.
D If prompted by Windows,
Windows 98SE and ME
users will need to restart
their PCs.
Proceed to Step 3.
Begin Installation
Connect the Adapter
Package Contents
• Wireless-G USB Network Adapter with
Wi-Fi Finder
• Setup Wizard CD-ROM
•User Guide on CD-ROM
• Quick Installation
with Wi-Fi Finder
GHz
2.4
802.11g
IMPORTANT: Do not connect the Adapter to Your PC
until you are instructed to do so in Step 2 or the
Adapter will not install correctly.
A
C
Connecting
the Adapter
WUSBF54G
To Next Page
Need help?
General
