LINKTAP D1 User Manual (English)

To Next Page

D1 User Manual

The LinkTap Wireless Water Timer is designed for private use in domestic

gardens to control sprinklers and watering systems through the LinkTap

app. The LinkTap's device must not be used for industrial purposes or in

conjunction with chemicals, dirty water, or easily flammable and explosive

substance.

Use 4 AA alkaline or 1.5V lithium batteries (not included). Good

quality 1.5V Li-ion rechargeable batteries can also be used. Do not

use carbon-zinc batteries.

Remove the timer from the faucet during freezing weather and

store inside.

Timer should not be submerged in water, used in damp pits or

buried.

---------------------------------------------------------------------------------------------------

Installation

Step 1:

Connect LinkTap Gateway to a LAN port of your home broadband modem

(or a network switch, a router, a hub, a Wi-Fi extender) using the supplied

ethernet cable. Power on the Gateway using the supplied USB cord and

power adapter. 3 solid green LEDs (Power, Link and Internet) indicate that

the Gateway has connected to the LinkTap cloud server. This process may

take up to a few minutes.

Need help?

Do you have a question about the LINKTAP D1 and is the answer not in the manual?

LINKTAP D1 Specifications

General

Brand	LINKTAP
Model	D1
Category	Lawn and Garden Equipment
Language	English

Summary

Installation Guide

Step 1: Gateway Setup

Connect the LinkTap Gateway to your home modem and power it on.

Step 2: Gateway Registration

Step 3: Add TapLinker

Add a new D1 TapLinker (wireless water timer) through the LinkTap app.

Step 4: Install Batteries

Insert 4 AA alkaline batteries into the TapLinker and switch it on.

Step 5: Connect to Faucet

Screw the TapLinker firmly to your garden tap by hand to prevent leaks.

Manual Watering and Fault Detection

Manual Watering Operation

Press the Manual On/Off button to start or stop watering.

Step 6: Enable Fault Alerts

Enable all fault alert options on the app for peace of mind.

Fault Detection Function Overview

Detects fall events, valve issues, and water flow anomalies via sensors.

LINKTAP D1 User Manual