AKURATE 226
Unpacking
T
he AKURATE 226 bass reinforcement speaker is heavy: take care when
removing it from its packaging.
Th
e AKUR
ATE 22
6
speaker is supplied with the following accessories:
●
mains lead
●
phono lead
We re
commend that you retain the packaging in case you need to transport the
AKURATE 226 speaker at a later date.
Quickstart
Positioning
The AKURATE 226 speaker can be placed anywhere you find convenient but
please consider the following points:
●
The AKURATE 226 speaker is best suited to be positioned on a floor, not
a table, shelf etc. It is heavy and must be stably supported.
●
For best results, position your AKURATE 226 speaker as close as
possible to either your left front or right front speaker.
●
Bass notes will be accentuated if the AKURATE 226 speaker is positioned
close to a wall or in a corner.
●
Experimenting with the position will be necessary in order to match the
sound of the AKURATE 226 speaker with other speakers in your system
and the acoustics of the room.
IMPORTANT:
Do not attempt to remove the metal grille covering the driver.
Cleaning
Disconnect the AKURATE 226 speaker from the power supply before cleaning.
Remove dust and fingerprints from the cabinet with a soft, dry, lint-free cloth.
Avoid using domestic cleaning products on the cabinet as they may damage
the veneer.
9
AKURATE Loudspeaker System
Owner’s Manual
AKURATE 226
English
Please refer to the supplied AKURATE 226 Quickstart Guide for basic
instructions on unpacking and connecting.
To Next Page
Loading...
