12
ARTIKULAT
Loudspeaker System
Owner’s Manual
English ARTIKULAT 350, 340, 320
Single-wiring
Position of link strips if single-wiring (i.e. using a single cable from one power amplifier
channel). No link adjustments or cuts are required.
Bi-wiring or bi-amping
Suggested position of separated link strips if bi-wiring (i.e. using two cables from one
power amplifier channel) or bi-amping (i.e. using two power amplifier channels).
Tri-wiring or tri-amping
Suggested position of separated link strips if tri-wiring (i.e. using three cables from one
power amplifier channel) or tri-amping (i.e. using three power amplifier channels).
Please note - link strips MUST be removed completely on ARTIKULAT 320.
Quad-wiring or quad-amping
Link strips MUST be removed if quad-wiring (i.e. using four cables from one power
amplifier channel) or quad-amping (i.e. using four power amplifier channels).
To Next Page
Loading...
Need help?
General
