Linn Artikulat User Manual

20
ARTIKULAT
Loudspeaker System
Owner’s Manual
English ARTIKULAT 345
Description and available settings for parameters
Default settings are shown in grey.
Parameter Symbol 0 1 2 3 4 5 6 7 8 9
10 50 75 100 115 135 160 190 235
18 22 25 30 34 40
55 85 130
-15 -10 -5 0 +5 +10 +15
0 +1 +2 +3 +4
External high pass
frequency.*
Increasing the setting
reduces the bass content
sent to the external
loudspeakers. (Hz)
Internal high pass
frequency. Increasing the
setting raises the lowest
frequency produced by the
unit. (Hz)
Internal low pass frequency.
Increasing the setting
raises the highest
frequency produced by the
unit. Reducing the setting
lowers the highest
frequency produced by the
unit. (Hz)
Coarse gain. Every one step
increase in the setting
raises the gain (volume) of
the loudspeaker by 5
decibels. Every one step
decrease in the setting
lowers the gain (volume) of
the loudspeaker by 5
decibels. (dB)
Fine gain. Every one step
increase in the setting
raises the gain (volume) of
the loudspeaker by 1
decibel. (dB)
No filtering
* Only for use when the ARTIKULAT 345 loudspeaker is connected to a power
amplifier (see Connecting section in this chapter).
0 +3 +6
5 10 20
Bass equalisation.
Every one step increase in
the setting applies an
additional 3dBs at 30 Hz
and below. (dB@30 Hz)
Time out. Length of time
before unit will go into
standby after audio input
ceases. (mins)
Parameter Symbol 0 1 2 3 4 5 6 7 8 9
Always on

Linn Artikulat Specifications

General

Brand	Linn
Model	Artikulat
Category	Speaker System
Language	English