5. Network
5.1 Network
- Select your network connection method.
Available options: Ethernet (Wired), Wireless.
5.2 Ethernet (when Network is in “Ethernet”)
- Configure Ethernet, such as IP address and Gateway.
Notice: Connect your local network using a LAN cable first.
5.3 Wi-Fi (when Network is in “Wireless”)
Wi-Fi: when entered, TV will scan available Wi-Fi account automatically. Use navigation
button to select an account and press OK to start connection.
WPS: setup WPS (Wi-Fi Protected Setup): Push button method or Generate a Security
PIN.
Note: If a Wi-Fi point has a security password, please enter the password using on-screen
keypad.
5.4 Network Test
- Test the network condition.
5.5 Network Information
- Display the network information.
To Next Page
Loading...
