EasyManua.ls Logo

Linsay X9000A4K - Insert the Battery; Insert the Micro Memory Card

Linsay X9000A4K
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Insert the Battery
Open the battery compartment on the bottom of the camera and slide in the battery.
Keep the plastic pull tab facing you.
Insert the Micro Memory Card:
Slide the memory card into the slot on the left side of the camera body.
The lettering on the memory card should face rearwards towards the back of the camera.
To Power On:
Long Press the Power/Mode button to turn on the camera
To Power Off
Long Press the Power/Mode button to turn off the camera
OVERVIEW
Turn camera ON and repeatedly press the Power/Mode Button to cycle through camera
modes and settings.The modes will appear in following order:
Video :Record Video
Photo : Capture a single photo
Burst: Capture photo burst
TL Video : Record Time Lapse Video
TL Photo: Shoot a series of photos at set time intervals
Video Playback