Linsay X9000A4K - Video Mode; Photo Mode; Burst Mode

7
Photo playback
Setting : adjust camera settings,resolution and more
VIDEO MODE
1.To record video,verify the camera in video mode.If the video icon on your camera’s LCD
screen is not showing,press the Power/Mode button repeatedly until it appears
2.To start recording:
Press the Shutter/Select Button.The camera will emit one beep and start recording.
3.To stop recording:
Press the shutter/Select Button. The camera emits one beep to indicate recording has
stopped.
This camera auto stops recording when the battery is out of power.
PHOTO MODE
Photo(14M)
To capture a photo,verify the camera in photo mode.If the photo icon on your camera’s LCD is
not showing,press the Power/Mode Button repeatedly until it appears
To take a photo:
Press the Shutter/Select Button.The camera will emit the camera shutter sound.
BURST MODE
Burst