Name: Linx 5900
Brand: Linx
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Page 5 of 8 FA69335–2 English

Jun 2013

How To Change the Print Settings

Linx 5900 & 7900

2.1.3 Print Height

You can make small adjustments to the height of the printed message. The adjustment

range depends on the message type.

Normally the aspect ratio of the message changes when you change the height because the

width does not change. To maintain the aspect ratio when you change the height, see ‘Lock

Aspect Ratio’ on page 6.

You can apply the setting and test the result while you are printing.

When you change the setting, the change applies only to the Current Message. You can use

a different setting for each message.

To change the Print Height

At the Print Monitor page, press the Print Settings key to display the Print Settings page.

Then select the Print Height option to display the Print Height page.

Figure 3. Print Height page

The default value is 0%. Enter a negative value to decrease the character height, or enter a

positive value to increase the character height. Use the Up arrow key or the Down arrow

key to adjust the value, or use the keyboard to enter the new value. The Apply key is not

available unless you change the value.

Do one of the following:

• Press the Apply key to save the Print Height value and keep the page open.

• Press the OK key to save the setting and return to the Print Settings page. Then press

the Exit key to display the Print Monitor page.

• Press the Cancel key to discard any changes and return to the Print Settings page.

69114

Bluehorse Whatsapp:+86 181 6857 5767 Email:sales@cheef.cn

Linx 5900 Setting Manual

Other manuals for Linx 5900