Page 2 of 12 FA69348–2 English
Jun 2013
12
How To Configure the Message Editor
and Logo Editor
Linx 5900 & 7900
1 Introduction
This document describes how you use the Editor Defaults page to define the default
parameters of new messages and, for the 7900 printer only, any logos that you create.
Any changes you make to the Editor Defaults become the starting settings for new
messages and logos that you create.
You need a User Level B password to perform all the tasks that are described in this
document with the exception of setting date offset limits which requires a User Level D
password.
1.1 Health and Safety
Make sure that you read and understand the Health and Safety information in the ‘Safety’
section of the Linx 5900 & 7900 Quick Start Guide.
To Next Page
Loading...
