Page 11 of 12 FA69348–2 English
Jun 2013
12
How To Configure the Message Editor
and Logo Editor
Linx 5900 & 7900
If this option is set to Yes, your supervisor can set the type of offset units used (for example
days only). They can set an upper and lower limit for each date offset unit (days or weeks or
months or years) or for all four units. If date offset limits are set, at User Level C or below
you cannot enter a date offset value outside the selected range. Any invalid value entered is
shown in red. The default limits for each unit are shown in Figure 11.
Figure 11. Date Offset Limits
To Next Page
Loading...
