Linx 5900 - Page 256

Page 15 of 19 FA69386–2 English
Jun 2013
19
How To Use the Communications
Options
Linx 5900 & 7900
5 Select the Responses option to display the Responses page.
Figure 18. Responses page
The following options are available. Select the required option to see the list of
available values:
• Message Received—this allows you to select the character that is used to
acknowledge that a message is received. The standard setting is ‘Disable’.
• Print Triggered—this allows you to select the character that is used to
acknowledge a print trigger. The standard setting is ‘Disable’.
• Print Started—this allows you to select the character that is used to
acknowledge the start of a print. The standard setting is ‘Disable’.
• Print Completed—this allows you to select the character that is used to
acknowledge the end of a print. The standard setting is ‘Disable’.
Clear Remote Fields
6 Clears all remote fields entered for QuickSwitch after the next print is completed.
To clear all remote fields, select this option, highlight ‘Yes’ and press the OK key to
return to the Setup page.
7 Press the Exit key three times to return to the Communications page.
69487