Page 4 of 15 FA69397–2 English
Jun 2013
15
How To Use the USB Connection
Linx 5900 & 7900
2.1 Copy messages to a memory stick
To copy messages from the printer to a memory stick:
1 Insert a memory stick into the USB connector at the front of the printer (see note on
page 2).
2 Select the Copy Messages to USB option to display the Copy Message to USB
page. A list of messages that are saved in the printer Message Store is displayed.
Figure 3. Copy Messages to USB page
NOTE: If there are no messages saved in the printer Message Store, the Copy,
Select, Select All, Deselect, and Deselect All options are not available.
3 To select a message to copy to the memory stick, use the Up and Down arrow keys
to highlight the name of the required message in the list, and the press the Select
key. A check mark appears in the box to the left of the message name to show that
the message is selected. To select more than one message, highlight each required
message, and then press the Select key.
Figure 4. Select messages to copy
To deselect a message, highlight the name of the required message in the list, and
then press the Deselect key. The check mark in the box to the left of the message
name is removed.
To Next Page
Loading...
